On a civil plan, draw a box to show a lift station. It’s then easy to imagine it as an individual piece of equipment.
Water is brought in, then flows through the station, and continues on to another location. Power, controls access to the station structural components, and connections to infrastructure surrounding are all important.
Image credit: romtecutilities.com
For project teams searching for the best lift station designers, one useful question is whether the engineering considers those interfaces not merely what happens inside the station.
Start upstream from the Wet Well
Consider a new development of residential homes as an example. The wastewater flows through the system of collection to the lift station. The site elevation and incoming flow conditions determine the amount of waste the station can handle.
After the water has reached the well, another set engineering decisions begins. The valves, pumps, piping control, structural parts as well as additional equipment should be designed to fit the needs of the project.
Romtec Utilities designs wastewater systems for commercial, municipal, and industrial sites as in development applications.
The project-specific approach is important because changing what happens upstream can affect what the pumping plant must accomplish.
Follow the Water beyond the Pumps
The problem does not end once the liquid is out of the well. The pumping system is required to move the liquid in accordance with the hydraulic conditions of the downstream system. The pump configuration and the flow requirements are affected by the flow requirements and required head conditions.
This is especially important when it comes to evaluating the top wastewater designers. The specs of a pump are impressive, but their effectiveness must be considered within the whole hydraulic system.
Romtec Utilities can design the electrical, mechanical, structural, and communication elements of a pumping station in an integrated unit. This will help ensure that the equipment is in line with the specifications of the project.
Stormwater Has Its Own Network of Connections
Stormwater infrastructure is different. Runoff from paved surfaces can be able to enter an infrastructure for collection and later pass through drainage, detention or flood management. In the event that pumping is necessary, the station can be considered a key element within the larger stormwater strategy.
It is crucial for companies searching for the most efficient stromwater designers to consider the location’s conditions, flows, the head requirements, environmental aspects and the stormwater plans that surround it.
Romtec Utilities supplies customized stormwater pumping systems for residential, commercial, industrial, and municipal projects rather than relying solely on the same configuration for each project.
Coordination Extends Above Ground Too
Some interfaces don’t require pipe. Electrical service must be able to support the equipment. Control and communications systems must be designed to fit the needs of the project. Contractors should have the correct plans and documentation. Installation, startup and service might require access to a physical location.
The documentation for the system is particularly valuable because these connections may involve multiple disciplines and participants. Romtec Utilities provides complete plan sets and associated project documentation and can support its systems through starting, testing and commissioning.
View Outside the Station Boundary
Even when a lift facility is designed correctly, it can remain a component of an uncoordinated plan if the external connections aren’t adequately addressed.
A better design perspective takes into account the water. What is its source? What conditions should it fulfill for it to be able to travel to the station? What happens while it is there? What happens after it has left? What infrastructure will allow the whole procedure to run?
By answering these questions, you can transform the concept of a lift station equipment exercise into infrastructure engineering.
